The 1930 Ford Street Rod “Durty Thirty” from The SEMA Show 2017.I don’t know where to start with this car…Everything is custom!!…It’s been widened….It’s been stretched.. …Four BIG wheels….With a kinda of a clover design??…That look like copper!?!!?…The interior….One of a kind for sure and all custom You will just have to see it…LS under the hood…Plenty of power…Little weight…Crazy stance…All custom…One of a kind!?!?!…Best I can do…You will just have to see if for yourself…Very cool for sure….Check it out!!!
Make sure you Subscribe to this Channel and Visit ScottieDTV.com
For cool new content weekly!!

A 1959 Chevrolet Corvette I found a The SEMA Show 2017….Ten feet in the the door…First day…I was already in love…And that is saying something…The first generation Corvette is not usually my first choice…. This 1959 Corvette is different…A true roadster….It has been stretched 6 inches so it looks sleek…..It’s on bags…So it almost lays on the ground . ..A LS 7 under the hood…With a really cool carbon fiber intake…..Black paint that is a mile deep…All the trim is like a black chrome….The interior is very classy…Yet very cool…And perfect for this build…….The SEMA Show always brings out some awesome Hot Rods and this 1959 Chevrolet Corvette was one of my favorites at The SEMA Show 2017 For sure!!….One very cool Custom Car!! Check it out!!
make sure you Subscribe to this Channel and Visit ScottieDTV.com
For cool new content weekly!!

The 1965 Cadillac Coupe Deville “Tequila Sunrise” debuted at The SEMA Show 2017…The owner Alyssa Kay said she wanted something that would make people smile…Something that would be welcome anywhere she wanted to go…Something that would have people taking…Well….She did it….With the help of Her right hand Man they built a 1965 Cadillac that you will not soon forget
laying on the ground….Bright orange paint….White wheels…Big
Chrome….The original engine…But all fresh and very nicely done
The interior is a worn type leather….with a ton of engraving….Crazy!
Please make sure you share this one with your friends…They will thank you!!!…Check it out!!!!
Make sure you Subscribe to this Channel and Visit ScottieDTV.com
For cool new content weekly!!

The 1970 Dodge Sweptline Pickup with two Cummins 5.9-liter 6BT inline-six diesel engine commonly referred to simply as the “12-valve” under the hood…They mate into one transmission and it runs one driveshaft to the the rear end….Built by Plowboy Diesel after joking that the 1970 Dodge engine bay was large enough to fit two Cummins 5.9-liter 6BT inline-six diesel engines….They were right they fit like a glove….With enough room for 4 turbos…Seems like every year the things I find at The SEMA Show blows my mind..
The SEMA Show 2017 was no exception….This is one you will want to share with your Friends…Very cool for sure…Check it out!!!
Make sure you Subscribe to this Channel and Visit ScottieDTV.com
For cool new content weekly!!!

The 1962 Chrysler 300….”Doris” built by The Classic Car Studio Speed Shop for a client on their TV show Speed is the new Black. I caught up with them and the car at The SEMA Show 2017…The Car had been at several shops before it showed up at their’s…Once Noah and the boy got their hands on it they knew how to make it cool….Don’t touch the natural patina….But stuff a Viper V-10 motor under the hood….Make sure you leave room for some turbos…Scott tells me…Although it doesn’t have them now…There is room for them in the future…The interior is mostly metal…With some different materials mixed in….One of a kind for sure…It may not have been a best seller back in the day…But I bet you will want this one…Very cool build for sure…Check it out!!!
Make sure you Subscribe to this Channel and Visit ScottieDTV.com
For cool new content weekly!!!

A 1940 Ford Street Rod built by Alloway’s Hot Rod Shop…They debuted it at The SEMA Show 2017 and it was very well received I start out at Alloway’s Shop before they loaded it for The SEMA Show 2017 and end up out in Vegas…Bobby calls this one a 1-800 car because everything can be ordered over the phone….But just because you can get the partsdoesn’t mean you will end up with a car a beautiful as this one.It’s a all steel reproduction body…Of course it has had a few nip and tucks done to it…The motor is a 429 Jon Kaase Boss Nine The wheels Billet Specialties….And of course it has a Pro Auto Custom Interior by Steve Holcomb…Big tires in the back…Smaller ones in the front…A big motor and paint it black…Works every time!
Make sure you Subscribe to this Channel and Visit ScottieDTV.com
For cool new content every week!!

The 1960 Chevrolet C/10 “Street Slime” built by Nichols Paint & Fab
They debuted it at The SEMA Show 2017…I was there to check it out shortly after…In this video Justin Nichols not only tells me about the finished product…But the challenges of building a 1960 Chevrolet C/10 that would meet their reputation for fit and finish.
And pass race tech….The front is all metal…Tilt…Front end..There is a supercharged 6.0 LS under that…The interior is mostly race truck… With touch of comfort…You can expect to see the truck at 2018 Goodguy’s and NSRA shows…But also Pikes Peak!!…The color is not the only crazy thing about this build…Way cool for sure….Check it out!!!
Make sure you Subscribe to this Channel and Visit ScottieDTV.com
For cool new content every week!!

The 2017 Hot Rod Builder Panel Powered by HRIA included Bobby Alloway – Alloway’s Hot Rod Shop; Alan Johnson – Johnson’s Hot Rod Shop; Troy Trepanier – Rad Rides by Troy; Jim and Mike Ring – Ring Brothers and was Presented by: Rick Love, Vintage Air anytime you can get a minuet of any of these guys time you should take advantage of it…To have a panel with this level of talent and history in the Hot Rod Custom Industry is just a incredible opportunity….If you are serious about building cool cars you should always attend this event…If you missed it…Here is your chance to hear what the top pros in the industry had to say….Check it out!!
Make sure you Subscribe to this Channel and Visit ScottieDTV.com
For cool new content every week!!!

A 1972 Chevrolet Corvette Custom I found at The SEMA Show 2017.Debuted by Vini’s Hot Rods at this years SEMA Show it was one that caught my eye. …A very clean build… Not a ton of body modifications although there are a few…A great stance achieved with the Ridetech Coilover system….Continental rubber on all four corners…I’m not usually a big fan of white…But this has enough blue and black accents to make it work for me…Great wheel choice
Full custom interior that really sets the car off…A LS 3 under the hood…With just the motor showing and some very nice panel work…Just a very cool clean build…I think you will like it too Check it out!!
Make sure you Subscribe to this Channel and Visit ScottieDTV.com
For cool new content every week!!

The 1965 Ford Mustang Fastback “T.A.600” built by Alloway’s Hot Rod Shop and debuted at The SEMA Show 2017 it had everyone talking…..Bobby is known for building black cars so to see one Red accented by flat grey paint was a shock to most people…It sets on Detroit Speed suspension with a Yates Ford Trans Am motor from back in the day under the hood…The perfect interior is the creation of Pro Auto Custom Interiors by Steve Holcomb…..This one is set up to drive…On the road and on the track…Very cool for sure….
Check it out!!!
Make sure you Subscribe to this Channel and Visit ScottieDTV.com
For cool new content every week!!